sfh620a / sfh6206 document number 83675 rev. 1.5, 26-oct-04 vishay semiconductors www.vishay.com 1 i179080 1 1 e c a/c c/a 1 2 4 3 pb p b -free e3 optocoupler, phototransistor output, ac input features ? good ctr linearity depending on forward current isolation test voltage, 5300 v rms high collector-emitter voltage, v ceo = 70 v low saturation voltage fast switching times low ctr degradation temperature stable low coupling capacitance end-stackable, .100 "(2.54 mm) spacing high common-mode interference immunity lead-free component component in accordance to rohs 2002/95/ec and weee 2002/96/ec agency approvals ul1577, file no. e52744 system code j csa 93751 bsi iec60950 iec60065 din en 60747-5-2 (vde0884) din en 60747-5-5 pending available with option 1 description the sfh620a (dip) and sfh6206 (smd) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. these couplers have a gaas infrared diode emitter, which is optically cou- pled to a silicon planar ph ototransistor detector, and is incorporated in a plastic dip-4 or smd package. the coupling devices are designed for signal trans- mission between two electrically separated circuits. the couplers are end-stackable with 2.54 mm lead spacing. creepage and clearance distances of > 8.0 mm are achieved with option 6. this version complies with iec 60950 (din vde 0805) for reinforced insulation to an operation voltage of 400 v rms or dc. order information for additional information on t he available options refer to option information. part remarks sfh620a-1 ctr 40 - 125 %, dip-4 sfh620a-2 ctr 63 - 200 %, dip-4 sfh620a-3 ctr 100 - 320 %, dip-4 sfh6206-1 ctr 40 - 125 %, smd-4 sfh6206-2 ctr 63 - 200 %, smd-4 sfh6206-3 ctr 100 - 320 %, smd-4 SFH620A-1-X006 ctr 40 - 125 %, dip-4 mil (option 6) sfh620a-2-x006 ctr 63 - 200 %, dip-4 mil (option 6) sfh620a-2-x007 ctr 63 - 200 %, smd-4 (option 7) sfh620a-3-x006 ctr 100 - 320 %, dip-4 mil (option 6)
www.vishay.com 2 document number 83675 rev. 1.5, 26-oct-04 sfh620a / sfh6206 vishay semiconductors absolute maximum ratings t amb = 25 c, unless otherwise specified stresses in excess of the absolute maximum ratings can caus e permanent damage to the device. f unctional operation of the device is not implied at these or any other conditions in excess of those given in the operati onal sections of this document. exposure to absolute maximum rating for extended periods of the time can adversely affect reliability. input output coupler parameter test condition symbol value unit reverse voltage v r 6.0 v dc forward current i f 60 ma surge forward current t p 10 si fsm 2.5 a power dissipation p diss 100 mw parameter test condition symbol value unit collector-emitter voltage v ce 70 v emitter-collector voltage v ec 7.0 v collector current i c 50 ma t p 1.0 ms i c 100 ma power dissipation p diss 150 mw parameter test condition symbol value unit isolation test voltage between emitter and detector, refer to climate din 40046, part 2, nov.74 v iso 5300 v rms creepage 7.0 mm clearance 7.0 mm insulation thickness between emitter and detector 4.0 mm comparative tracking index per din iec 112/vdeo 303, part 1 175 isolation resistance v io = 500 v, t amb = 25 c r io 10 12 ? v io = 500 v, t amb = 100 c r io 10 11 ? storage temperature range t stg - 55 to + 150 c ambient temperature range t amb - 55 to + 100 c junction temperature t j 100 c soldering temperature max. 10 s. dip soldering distance to seating plane 1.5 mm t sld 260 c
sfh620a / sfh6206 document number 83675 rev. 1.5, 26-oct-04 vishay semiconductors www.vishay.com 3 electrical characteristics t amb = 25 c, unless otherwise specified minimum and maximum values are testing requirements. typical val ues are characteristics of the device and are the result of eng ineering evaluation. typical values are for information only and are not part of the testing requirements. input output coupler note: still air, coupler soldered to pcb or base current transfer ratio parameter test condition symbol min ty p. max unit forward voltage i f = 60 ma v f 1.25 1.65 v capacitance v r = 0 v, f = 1.0 mhz c o 50 pf thermal resistance r thja 750 c/w parameter test condition symbol min ty p. max unit collector-emitter capacitance v ce = 5.0 v, f = 1.0 mhz c ce 6.8 pf thermal resistance r thja 500 c/w parameter test condition part symbol min ty p. max unit collector-emitter saturation voltage i f = 10 ma, i c = 2.5 ma v cesat 0.25 0.4 v coupling capacitance c c 0.2 pf collector-emitter leakage current v ce = 10 v sfh620a-1 sfh6206-1 i ceo 2.0 50 na sfh620a-2 sfh6206-2 i ceo 2.0 50 na sfh620a-3 sfh6206-3 i ceo 5.0 100 na parameter test condition part symbol min ty p. max unit i c /i f v ce = 5.0 v, i f = 10 ma sfh620a-1 sfh6206-1 ctr 40 125 % sfh620a-2 sfh6206-2 ctr 63 200 % sfh620a-3 sfh6206-3 ctr 100 320 % v ce = 5.0 v, i f = 1.0 ma sfh620a-1 sfh6206-1 ctr 13 30 % sfh620a-2 sfh6206-2 ctr 22 45 % sfh620a-3 sfh6206-3 ctr 34 70 %
www.vishay.com 4 document number 83675 rev. 1.5, 26-oct-04 sfh620a / sfh6206 vishay semiconductors switching characteristics typical characteri stics (tamb = 25 c unless otherwise specified) isfh620a_08 r l =75 ? v cc =5v 47 ? i f i c figure 1. switching times linear operation (without saturation) parameter te s t c o n d i t i o n symbol min ty p. max unit turn-on time r l = 75 ? , i f = 10 ma, v cc = 5.0 v t on 3.0 s rise time r l = 75 ? , i f = 10 ma, v cc = 5.0 v t r 2.0 s turn-off time r l = 75 ? , i f = 10 ma, v cc = 5.0 v t off 2.3 s fall time r l = 75 ? , i f = 10 ma, v cc = 5.0 v t f 2.0 s cut-off frequency r l = 75 ? , i f = 10 ma, v cc = 5.0 v f ctr 250 khz figure 2. current transfer ratio (ctr) vs. temperature isfh620a_01 i f = 10 ma, v ce = 5.0 v fiure 3.outputcharacteristics (typ.)collectorcurrents. collectoremittervoltae isfh620a_02
sfh620a / sfh6206 document number 83675 rev. 1.5, 26-oct-04 vishay semiconductors www.vishay.com 5 figure 4. diode forward voltage (typ.) vs. forward current figure 5. transistor capacitance (t yp.) vs. collector-emitter voltage figure 6. permissible pulse hand ling capability forward current vs. pulse width isfh620a_03 isfh620a_04 f = 1.0 mhz isfh620a_05 pulse cycle d = parameter, fiure 7.permissilepoerdissi pations.amienttemperature fiure 8.permissilediodefo rardcurrents.amient temperature isfh620a_06 isfh620a_07
www.vishay.com 6 document number 83675 rev. 1.5, 26-oct-04 sfh620a / sfh6206 vishay semiconductors package dimensions in inches (mm) package dimensions in inches (mm) i178027 .255 (6.48) .268 (6.81) 1 2 4 3 .179 (4.55) .190 (4.83) pin one id .030 (.76) .045 (1.14) 4 typ. .100 (2.54) .130 (3.30) .150 (3.81) .020 (.508 ) .035 (.89) 10 3C9 .018 (.46) .022 (.56) .008 (.20) .012 (.30) .031 (.79) typ. .050 (1.27) typ. .300 (7.62) typ. .110 (2.79) .130 (3.30) .230 (5.84) .250 (6.35) .050 (1.27) iso method a i178029 .255 (6.48) .268 (6.81) 34 .179 (4.55) .190 (4.83) pin one id .030 (.76) .045 (1.14) 4 typ. 1.00 (2.54) typ. .130 (3.30) .150 (3.81) .0098 (.249) .035 (.102) .020 (.508) .040 (1.02) .031 (.79) typ. .050 (1.27) typ. .010 (.25) typ. 10 3C7 .375 (9.52) .305 (10.03) .296 (7.52) .312 (7.90) .315 (8.00) min. lead coplanarity .004 max. smd iso method a .100 (2.54) r .010 (.25) .070 (1.78) .030 (.76) .315 (8.00) mi n .060 (1.52) .435 (11.05)
sfh620a / sfh6206 document number 83675 rev. 1.5, 26-oct-04 vishay semiconductors www.vishay.com 7 .014 (0.35) .010 (0.25) .400 (10.16) .430 (10.92) .307 (7.8) .291 (7.4) .407 (10.36) .391 (9.96) option 6 .315 (8.0) min. .300 (7.62) typ . .180 (4.6) .160 (4.1) .331 (8.4) min. .406 (10.3) max. .028 (0.7) min. option 7 18487
www.vishay.com 8 document number 83675 rev. 1.5, 26-oct-04 sfh620a / sfh6206 vishay semiconductors ozone depleting substances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve the performan ce of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate rele ases of those substances in to the atmosphere which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its po licy of continuous improvements to eliminate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively 2. class i and ii ozone depleting substances in the clean air act amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semi conductors are not manufactured with ozone depleting substances and do not co ntain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating parameters must be validated for each customer application by the customer. should the buy er use vishay semiconductors products for any unintended or unauthorized application, the buyer sh all indemnify vishay semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany telephone: 49 (0)7131 67 2831, fax number: 49 (0)7131 67 2423
|
